Complete hot zone solutions — from individual parts to fully assembled hot zones.
Baotan Graphite supplies graphite hot zone components to furnace OEMs and end-users worldwide. From individual replacement parts to complete retrofit kits — all from a single source, ensuring material consistency and dimensional compatibility.
Our components are used in vacuum brazing, sintering, heat treatment, and melting furnaces across aerospace, automotive, medical device, and tooling industries.
Request Quote →
| Category | Components | Typical Grades |
|---|---|---|
| Heating Elements | Rod, tube, strip, mesh heaters | Isostatic, extruded graphite |
| Heat Shields | Circular, side, top/bottom shields, multi-layer packs | Rigid graphite felt, CFC |
| Structural Parts | Support trays, pillars, guide rails, brackets, base plates | Isostatic graphite, CFC |
| Fasteners | Bolts, nuts, washers, threaded rods, pins | Extruded, isostatic graphite |
| Rotating Parts | Fan blades, impellers, rotors, bearings | Fine-grain isostatic graphite |
| Custom | Any shape per drawing — crucibles, nozzles, boats, fixtures | Per application |
| Parameter | Value |
|---|---|
| Max Operating Temperature | 2,200°C (vacuum) / 1,800°C (inert gas) |
| Material Grades | Isostatic, extruded, molded, CFC, rigid graphite felt |
| Density Range | 1.72 – 1.90 g/cm³ |
| Ash Content | ≤ 50 ppm (standard) / ≤ 5 ppm (high-purity) |
| Flexural Strength | 30 – 65 MPa (grade-dependent) |
| Thermal Conductivity | 80 – 140 W/m·K |
Send your drawings or worn parts. Quote within 24 hours.
Get a Quote →